Form MHD56391PARTS, OPERATION AND MAINTENANCE MANUALforMANUAL CHAIN HOIST MODELSSMB005 SMB010 SMB015 SMB0201/2 ton 1 ton 1-1/2 ton 2 tonSMB030 SMB0503
10 MHD56391 - Edition 2General DisassemblyThe following instructions provide the necessary information to disassemble, inspect, repair, and assemble t
MHD56391 - Edition 2 11RepairActual repairs are limited to the removal of small burrs and other minor surface imperfections from gears and shafts. Use
12 MHD56391 - Edition 2Hand Chain Adjustment or ReplacementCAUTION• When cutting the weld side of a hand chain link, do not cut or nick the opposite s
MHD56391 - Edition 2 13SERVICE NOTES
14 MHD56391 - Edition 2HOIST ASSEMBLY PARTS DRAWING5 ton5 ton5 ton356818313070672423639876534110262115916620333165644138126243219229267681831303925247
MHD56391 - Edition 2 15HOIST ASSEMBLY PARTS LISTITEMNO.DESCRIPTIONOF PARTQTY.TOTALPART NO.1/2 ton 1 ton 1-1/2 ton 2 ton 3 ton 5 ton* Cover Kit (inclu
16 MHD56391 - Edition 2HOIST ASSEMBLY PARTS LIST CONTINUEDITEMNO.DESCRIPTIONOF PARTQTY.TOTALPART NO.1/2 ton 1 ton 1-1/2 ton 2 ton 3 ton 5 ton31 Sprin
MHD56391 - Edition 2 17ACCESSORIES AND KITS PARTS LISTDESCRIPTION OF PART PART NO.Chain Lubricant LUBRI-LINK-GREEN®PARTS ORDERING INFORMATIONThe use o
18 MHD56391 - Edition 2DECLARATION OF CONFORMITYDECLARATION OF CONFORMITY(CS) PROHLÁŠENÍ O SHODċ (DA) FABRIKATIONSERKLÆRING (DE) KONFORMITÄTSERKLÄRUNG
MHD56391 - Edition 2 19WARRANTYLIMITED WARRANTYIngersoll Rand Company warrants to the original user its Hoists and Winches (Products) to be free of de
2 MHD56391 - Edition 21SAFETY INFORMATIONThis manual provides important information for all personnel involved with the safe installation, operation a
www.irtools.comPrinted in China
MHD56391 - Edition 2 312. When using two hoists to suspend one load, select two hoists each having a rated capacity equal to or more than the load. Th
SeriesHoistCapacityLift (Hoist load chain/hook travel)Hand Chain (Hand chain is 2 ft less than lift)SlipClutchSMB= Silver SeriesManualChain Hoist005 =
MHD56391 - Edition 2 5Initial Operating ChecksCAUTION• Ensure the hoist top hook is properly installed on the support member and the hook latch is eng
6 MHD56391 - Edition 2Load Chain ReportsRecords should be maintained documenting the condition of load chain removed from service as part of a long-ra
MHD56391 - Edition 2 71. Fasteners. Check rivets, capscrews, nuts, cotter pins and other fasteners on hooks and hoist body. Replace if missing and tig
8 MHD56391 - Edition 2TROUBLESHOOTINGThis section provides basic troubleshooting information. Specific causes to problems are best identified by thoro
MHD56391 - Edition 2 93. Using a “C” link, join the old load chain to the new load chain. (If the old load chain was installed correctly, the “C” link
Comments to this Manuals