Ingersoll-rand 66M170-XXX-C User Manual download pdf

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506



(800) 276-4658

y

FAX (800) 266-7016

© 2010 CCN 15321524

www.ingersollrandproducts.com

OPERATOR’S MANUAL 66M150-XXX-C

66M170-XXX-C

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

RELEASED: 11-3-08

REVISED:

8-25-10

(REV. 0

5)

1-1/2" DIAPHRAGM PUMP

1:1 RATIO, METALLIC

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

The original language of this manual is English.

SERVICE KITS

Refer to Model Description Chart to match the pump mate-

rial options.

637118-C for air section repair (see page 6).

637469-XX for  uid section repair (see page 4).

PUMP DATA

Models . . . . . . . . . . . see Model Description Chart for “-XXX”

Pump Type . . . . . . . Metallic Air Operated Double Diaphragm

Material . . . . . . . . . . see Model Description Chart

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.53 lbs (25.19 kgs)

Maximum Air Inlet Pressure . . . . . . . . 120 p.s.i.g. (8.3 bar)

Maximum Material Inlet Pressure . . . 10 p.s.i.g. (0.69 bar)

Maximum Outlet Pressure . . . . . . . . . . 120 p.s.i.g. (8.3 bar)

Maximum Flow Rate

( ooded inlet)

. . . 80 g.p.m. (302.8 l.p.m.)

Displacement / Cycle @ 100 p.s.i.g. . 0.46 gal. (1.74 lit.)

Maximum Particle Size . . . . . . . . . . . . . 1/2” dia. (12.7 mm)

Maximum Temperature Limits (diaphragm / ball / seal

material)

E.P.R. . . . . . . . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)

Hytrel® . . . . . . . . . . . . . . . . . . . -20° to 150° F (-29° to 66° C)

Nitrile . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)

Santoprene® . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)

PTFE. . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)

Viton® . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)

Dimensional Data . . . . . . . . . . . . . . . . . . . see page 8

Noise Level @ 70 p.s.i., 60 c.p.m.

c

. . . 77.7 db(A)

d

Noise Level @ 70 p.s.i., 60 c.p.m.

e

. . . 107.0 db(A)

d

c



Tested with 93139 muffler assembly installed.

d

The pump sound pressure levels published here have been updated to

an Equivalent Continuous Sound Level (L

Aeq

) to meet the intent of ANSI

S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

e



Tested with 97117 housing and 97114 ball installed. Hearing protection

is recommended when operating this product.

NOTICE: All possible options are shown in the chart, however,

certain combinations may not be recommended, consult a

representative or the factory if you have questions concerning

availability.

Figure 1

MODEL DESCRIPTION CHART

66M1 X 0 - X X X - C

Center Body Material / Fluid Connection

5 - Aluminum / 1-1/2 - 11-1/2 NPTF - 1

7 - Aluminum / Rp 1-1/2 (1-1/2 - 11 BSP parallel)

Ball Material

2 - Nitrile

C - Hytrel

E - Santoprene

Example: Model #66M150-1EB-C

Fluid Section Service Kit # 637469-EB

66M1X0 - X X X - C

Ball Diaphragm

637469 - X X

Fluid Cap & Manifold Material / Hardware

0 - Aluminum / Carbon steel

Diaphragm Material

2 - Nitrile

9 - Hytrel

B - Santoprene

Seat Material

1 - Aluminum

Fluid Section Service Kit Selection

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 1-1/2" DIAPHRAGM PUMP

INGERSOLL RAND COMPANY LTD209 NORTH MAIN STREET – BRYAN, OHIO 43506 (800) 276-4658 y FAX (800) 266-7016 © 2010 CCN 15321524www.ingersollrandproducts

Page 2 - HAZARDOUS PRESSURE

Page 2 of 8 66M150-XXX-C (en)WARNING EXCESSIVE AIR PRESSURE. Can cause per-sonal injury, pump damage or property damage.Do not exceed the maximum inl

Page 3

66M150-XXX-C (en) Page 3 of 8y Viton®and Hytrel® are registered trademarks of the DuPont Company y Loctite® is a registered trademark of Henkel Locti

Page 4 - MATERIAL CODE

Page 4 of 8 66M150-XXX-C (en)PARTS LIST / 66M150-XXX-C FLUID SECTIONn 637469-XX Fluid section service kit includes: Balls (see Ball Option, refer to

Page 5 - (•) Dot

66M150-XXX-C (en) Page 5 of 8222119 2715222119 1851871 57 3 14  2182 188 18418828321626 28028159 3 2928 2918896Tab18326 163224) ASSEMBLY T

Page 6

Page 6 of 8 66M150-XXX-C (en)MATERIAL CODE[A] = Aluminum [I] = Iron[B] = Nitrile [Ny] = Nylon[Bz] = Bronze [SS] = Stainless Steel[C] = Carbon S

Page 7 - 116111115112109 113

66M150-XXX-C (en) Page 7 of 8116111115112109 113 114 110 105 107117197 102 103 104121119 123 118 122 120 197104121 12343 198107 1051

Page 8 - DIMENSIONAL DATA

Page 8 of 8 66M150-XXX-C (en)PN 97999-1402CABFEDLJHGK - Air inletM - Material outletN - Exhaust portTROUBLE SHOOTINGProduct discharged from exhaust o

Related models: 66M150-XXX-C

Comments to this Manuals

No comments