Ingersoll-rand ARO 66M3X0-XXX-C User Manual download pdf

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506



(800) 276-4658

y

FAX (800) 266-7016

© 2010 CCN 15321482

www.ingersollrandproducts.com

OPERATOR’S MANUAL 66M3X0-XXX-C

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

RELEASED: 10-22-08

REVISED: 5-6-10

(REV. 05)

3" DIAPHRAGM PUMP

1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

The original language of this manual is English.

SERVICE KITS

Refer to Model Description Chart to match the pump material op-

tions.

637434 for air section repair (see page 6).

637467-XX for  uid section repair (see page 4).

PUMP DATA

Models . . . . . . . . . . . . . . . . . see Model Description Chart for “-XXX”

Pump Type . . . . . . . . . . . . . Metallic Air Operated Double Diaphragm

Material . . . . . . . . . . . . . . . . see Model Description Chart

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118.32 lbs (53.67 kgs)

Maximum Air Inlet Pressure . . . . . . . . . . . 120 p.s.i.g. (8.3 bar)

Maximum Material Inlet Pressure . . . . . . 10 p.s.i.g. (0.69 bar)

Maximum Outlet Pressure . . . . . . . . . . . . . 120 p.s.i.g. (8.3 bar)

Maximum Flow Rate ( ooded inlet) . . . 217 g.p.m. (821.3 l.p.m.)

Displacement / Cycle @ 100 p.s.i.g. . . . . 2.08 gal. (7.9 lit.)

Maximum Particle Size . . . . . . . . . . . . . . . . 1” dia. (25.4 mm)

Maximum Temperature Limits (diaphragm / ball / seal material)

E.P.R. / EPDM . . . . . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)

Hytrel® . . . . . . . . . . . . . . . . . . . . . . . . . -20° to 150° F (-29° to 66° C)

Nitrile . . . . . . . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)

Santoprene® . . . . . . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)

Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)

Dimensional Data . . . . . . . . . . . . . . . . . . . . . . see page 8

Noise Level @ 70 p.s.i., 60 c.p.m.

c

. . . . . . 86.3 db(A)

d

Noise Level @ 70 p.s.i., 60 c.p.m.

e

. . . . . . 108.7 db(A)

d

c

Tested with 94810 mu er assembly installed.

d

The pump sound pressure levels published here have been updated to

an Equivalent Continuous Sound Level (L

Aeq

) to meet the intent of ANSI

S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

e

Tested with 97116 housing and 97110-2 ball installed. Hearing protec-

tion is recommended when using this product.

NOTICE: All possible options are shown in the chart, however, certain

combinations may not be recommended, consult a representative or

the factory if you have questions concerning availability.

Figure 1

MODEL DESCRIPTION CHART

66M3 X 0 - X X X - C

Center Body Material / Fluid Connection

0 - Aluminum / 3 - 8 NPTF - 2

2 - Aluminum / Rp 3 (3 - 11 BSP parallel)

Ball Material

2 - Nitrile

C - Hytrel

E - Santoprene

Example: Model #66M300-1EB-C

Fluid Section Service Kit # 637467-EB

66M3X0 - X X X - C

Ball Diaphragm

637467 - X X

Fluid Cap & Manifold Material / Hardware

0 - Aluminum / Carbon steel

Diaphragm Material

2 - Nitrile

9 - Hytrel

B - Santoprene

Seat Material

1 - Aluminum

Fluid Section Service Kit Selection

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 3" DIAPHRAGM PUMP

INGERSOLL RAND COMPANY LTD209 NORTH MAIN STREET – BRYAN, OHIO 43506 (800) 276-4658 y FAX (800) 266-7016 © 2010 CCN 15321482www.ingersollrandproducts

Page 2 - HAZARDOUS PRESSURE

Page 2 of 8 66M3X0-XXX-C (en)WARNING EXCESSIVE AIR PRESSURE. Can cause personal injury, pump damage or property damage.Do not exceed the maximum inle

Page 3

66M3X0-XXX-C (en) Page 3 of 8y Hytrel® and Viton® are registered trademarks of the DuPont Company y Loctite® is a registered trademark of Henkel Loct

Page 4 - MATERIAL CODE

Page 4 of 8 66M3X0-XXX-C (en)PARTS LIST / 66M3X0-XXX-C FLUID SECTIONn 637467-XX Fluid section service kit includes: Balls (see Ball Option, refer to

Page 5 - ALL FASTENERS ARE METRIC

66M3X0-XXX-C (en) Page 5 of 8222119 27 15222119 6026 6916126 5 196 7 3 14 2 29280281188183182 187 186 185188184182186) ASSEMBLY TORQUE REQUI

Page 6 - AIR MOTOR PARTS

Page 6 of 8 66M3X0-XXX-C (en)MATERIAL CODE[A] = Aluminum [I] = Iron[B] = Nitrile [Ny] = Nylon[Bz] = Bronze [SS] = Stainless Steel[C] = Carbon S

Page 7

66M3X0-XXX-C (en) Page 7 of 8105 107117197 102 103 104121119 123 118 122 120101 197104121 12343 198107 105108109 110 128 12620128212

Page 8 - Figure 5

Page 8 of 8 66M3X0-XXX-C (en)PN 97999-1398CABDEFJHGL - Material outlet M - Exhaust portK - Air inletTROUBLE SHOOTINGProduct discharged from exhaust o

Comments to this Manuals

No comments