Ingersoll-rand 650632-X-C User Manual

Browse online or download User Manual for Pumps Ingersoll-rand 650632-X-C. Ingersoll-Rand 650632-X-C User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
OPERATOR’S MANUAL 650632--X--C
RELEASED: 11--15--96
REVISED: 6--4--10
(REV. 02)
FOUR BALL PUMP SERIES
6” AIR MOTOR
4:1 RATIO
6” STROKE
INCLUDE MANUALS: 6695X --X LOWER PUMP END (PN 97999--002) &
S--632 GENERAL INFORMATION MANUAL (PN 97999--624)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
650632--X43--C
CARBON STEEL, ELECTROLESS NICKEL PLATED
SERVICE KITS
Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
61355 for repair o f Air Motor section.
Service Note: The Air Motor Service/Parts Manual is not shipped
with the pump but it is included with each Service Kit. If this Service/
PartsInformation isneeded, requestthe AirMotor Operator’sManu-
al from ARO. (Manual 6564X--X, PN 97999--174).
637230- X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --X43 options.
SPECIFICATIONS
Model Series (Refer to option chart) 650632--X43--C..
Type Air Operated, Four Ball....................
Ratio 4:1....................
Air Motor 65665--B.................
Motor Repair Kit 61355..........
Motor Diameter 6” (15.2 cm)...........
Stroke 6’’..................
Air Inlet 1/2’’ -- 14 NPTF--1(f).................
Air Exhaust 1--1/4’’, 11--1/2 NPTF--1(f)..............
Lower Pump End Series 66953--X43.....
Lower Pump Repair Kit 637230--X43.....
Material Outlet 3/4” NPTF--1(f)...........
PERFORMANCE
Air Inlet Pressure Range 30 -- 150 PSI (2 -- 10.3 bar).....
Fluid Pressure Range 120 -- 600 PSI (8.3 -- 41.4 bar).......
Max. Rec’d Cycles / Minute 70...
Displacement In
3
Per Cycle 82...
Volume/Cycle 45.4 oz. (1343 ml).............
Cycles Per Gallon 2.8..........
Flow @ 60 Cycles / Minute 21.3 GPM (80.6 lpm)....
Noise Level @ 60 Psi - 40 Cpm 84.8 db(A) *
* The pump sound pressure level has been updated to an Equivalent Continuous Sound
Level (L
Aeq
) to meet the intent of ANSI S1. 13--1971, CAGI --PNEUROP S5.1 using four
microphone locations.
PUMP DATA
Air Motor
65665--B
(See Manual 6564X -- X)
FIGURE 1
Material Outlet
3/4’ NPTF--1(f)
75_ FROM AIR EXHAUST
Lower Pump
66953--X43
(See Manual 6695X--X)
Air Inlet
1/2--14 NPTF--1(f)
(Not Shown)
Spacer Section
14- 21/32
(372 mm)
Accessories Available: 91790 Silencer, 66101 Wall Bracket.
NUT Y85--29--N (3)
WASHER Y14--625 (3)
SPACER ROD 93233--1 (2)
CONNECTOR
SeeFigure2
MODEL 650632- X43- C
17- 25/32
(452 mm)
38- 5/8
(981 mm)
SPRING 94457
SPACER ROD 93233--2
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650632--X--C MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6695X--X LOWER PUMP END OPERATOR’S MANUAL
- 6564X--X AIR MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 99711836
Page view 0
1 2

Summary of Contents

Page 1 - 650632--X43--C

OPERATOR’S MANUAL 650632--X--CRELEASED: 11--15--96REVISED: 6--4--10(REV. 02)FOUR BALL PUMP SERIES6” AIR MOTOR4:1 RATIO6” STROKEINCLUDE MANUALS: 6695X

Page 2 - = FLUID PRESSURE

650632- X- CPUMP OPTION DESCRIPTION CHART650632--XPACKING MATERIALPLUNGER TYPESPRING ARRANGEMENTPACKING MATERIAL (PACKINGS ARE UPPER AND LOWER UNLESS

Comments to this Manuals

No comments